REA Scan Check 3 - Technical Data

Technical Data REA ScanCheck 3

CPU:	ARM9 ® 32bit, 180MHz
OS:	ElinOS
Memory:	FlashROM: 16MB, RAM 32MB, 512MB MMC card for report storage
Light Source:	Laserclass 2, Wavelength 670 nm (red light)
Modulation:	5 MHz
Scan speed:	aprox. 45 Scans/s, 1 Mirror of 10 is used
Aperture:	selectable 6, 8, 10 and optional 20 mil
Laser security:	EN 60825
Evaluations:	According to ISO/IEC 15416, ANSI X3.182 and symbologies standards
Software Options:	Comparator, Article Look Up, TransWin32, optional codes
Symbologies:	EAN-13, UPC-A, UPC-E with/without ADD-ON, EAN-8, 2/5 Interleaved with/without check code, ITF-14, Frachtpost, Code 39 with/without check code, PZN, Code 32, Code 128, GS1-128 with/without check of content, new: GS1-Databar
Optional symbologies:	2/5 3 Bars, 2/5 5 Bars, 2/5 IATA, 2/5 Baggage, 2/5 DHL Express ( Frachtpost-Code), Code39 Full ASCII, Code93, MSI, Plessey, Code128UPU, Code39UPU, Code39HIBC, Code128HIBC, Codabar Monarch (18), LAETUS Pharmacode, LAETUS MiniPharmaCode
Interfaces:	Printer via USB socket, type A PC-connection by 6-pin STEWART Compu-Shield plug
Batteries:	4 x 1.2 V / 2.700 mAh, NiMH, rechargeable, type AA
Power supply:	DC 9 Volt / 0,5A operating / 3A max load (included)
Display:	Graphic Colour TFT Display, 320 x 240 Pixel, backlight
Keyboard:	21 keys
Housing:	Aluminium, black painted
Temperature:	Operation 0 °C - +40 °C Storage -20 °C - +70 °C
Humidity:	max. 80 % relative, not condensing
Size:	222 x 85 x 134 mm (L x W x H )
Weight:	1.115 g, including batteries
Maintenance:	monthly calibration required
Cleaning:	Lens and red-light exit window with a non nappy cloth only.

Power supply for REA ScanCheck 3

Input voltage:	100 –240 Volt AC / 47 – 63 Hz, 700mA
Output voltage:	9 V / 3 A, electronic regulated, short cut resistant
Case:	Plastic ABS, black
Temperature:	Operation 0 °C - +65 °C Storage -20 °C - +65 °C
Humidity:	max. 80 % relative, not condensing
Size:	100 x 80 x 65 (B x W x H)
Weight:	300 g
Maintenance:	Maintenance free
Primary socket:	available for US, UK or EURO power plug standards, others on request

Thermal printer REA TD-GPT-U

Batteries:	NiMH-Battery pack 4,8V, 1.500 mAh, rechargeable
Case:	Plastic PC/ABS with 15 % Glass fibre, black
Interface:	Mini-USB-plug for REA ScanCheck 3 connection
Power Connector:	Low voltage barrel connector
Printer:	Direct thermal using a fixed thermal print head
Resolution:	8 dots / mm (203 dpi), 384 dots in one print line
Speed:	max. 50 mm/s / 16 lines/s, 3 mm height
Paper:	direct thermal, wood free
Paper width:	57.0 mm +/- 0.5 mm
Diameter:	max. 31 mm, Core 7 mm, Paperlength 11m (60g/m²)
Print width:	max. 48 mm
Temperature	Operation 0 °C - +50 °C Storage -20 °C - +65 °C
Humidity:	80 % relative, not condensing
Size:	159 x 89 x 46 mm (L x W x H)
Weight:	350 g

Plug in charger for direct thermal printer REA TD-GPT-U
Only for in-house use

Input voltage:	230 Volt AC / 50 Hz, 7,9W
Output voltage:	6 V AC / 0,5 A, 3VA
Connection:	primary Euro powerplug, others on request Secondary: low voltage barrel connector 5 mm, 2.5 mm
Case:	ABS plastic
Temperature:	Operation 0 + 50°C Storage -20 °C - +65 °C
Humidity:	max 80 % relative, not condensing
Size:	55 x 48 x 80 mm (L x W x H) + cable length 170 cm
Weight:	240 g
Maintenance:	Maintenance free

For further information, please don't hesitate to get in contact with us.